Say goodbye to the complicated codes which other systems asking their users to remember and operate on the keypad. Just tapping in our apps, you would be supprized about this gentle and easy way to control such a powerful system. Scanning QR codes for pairing, checking Smart Cameras, turning ON/OFF the Smart Plug etc., all in our apps.
Say goodbye to the complicated codes which other systems asking their users to remember and operate on the keypad. Just tapping in our apps, you would be supprized about this gentle and easy way to control such a powerful system. Scanning QR codes for pairing, checking Smart Cameras, turning ON/OFF the Smart Plug etc., all in our apps.
The wireless vibration sensor is an accessory of smart alarm system. It’s fashion design, energy saving, low battery alert supported and with long transmission distance. The main panel will send a SMS to user for battery replacement when needed. It sends trigger signal to main panel when detects vibration. It’s ideal for security of safes, drawers, doors and windows.
| Working Voltage | DC 3V |
| Battery | 1 × CR2032 button battery(3V) |
| Working Current | ≤27mA |
| Standby Current | ≤2μA |
| Transmission Distance | Without obstacle 500m |
| Transmission Frequency | 433.92MHz |
| Working Temperature | -10°C~50°C |
| Humidity | ≤90%rh (non-condensing) |
| Weight | 21.7g(battery not included) 24.9g(battery included) |
| Dimension | 80.0mm*38.2mm*13.3mm L*W*H |
Say goodbye to the complicated codes which other systems asking their users to remember and operate on the keypad. Just tapping in our apps, you would be supprized about this gentle and easy way to control such a powerful system. Scanning QR codes for pairing, checking Smart Cameras, turning ON/OFF the Smart Plug etc., all in our apps.
The wireless contact sensor is an accessory of smart alarm system.It’s fashion design, energy saving, and low battery warning supported. The main panel will send a SMS to user for battery replacement when needed. It’s easy to setup and works well with most doors and windows. When transmitter and magnet are apart, the sensor triggers alarm.
• Transmitter can be put on either of magnet’s left or right side.
| Working Voltage | DC 3V |
| Battery | 1 × CR2032 button battery(3V) |
| Working Current | ≤27mA |
| Standby Current | ≤2μA |
| Transmission Distance | Without obstacle 500m |
| Transmission Frequency | 433.92MHz |
| Working Temperature | -10°C~50°C |
| Humidity | ≤90%rh (non-condensing) |
| Weight | 35.5g(battery not included) 46.7g(battery included) |
| Dimension | Transmitter: 80.0mm*38.2mm*13.3mm Magnet: 80.0mm*14.8*12.9mm (L*W*H) |
Live streaming and constant recordings in super clear HD quality. IR night vision ensures that the recordings are ready, even in full darkness.
• Image Sensor: 1/2.7″ 1080P CMOS
• Effective Pixels:1920(H)x1080(V)
• WDR: Digital WDR
• Noise Reduction: 3D DNR
• Day/Night control (IR-Cut): Auto(ICR) / Color / Black&White
• Motion detection: Supported
• SD Card: Supported, up to 128GB
• IR distance: 8m
• Focal Length: 2.8mm
• Max Aperture: F2.4
• Focus control: Fixed
• Angle of View: 140°
• Encode: H.265 Main/Baseline profile
• Resolution:
• Video Bitrates: 32Kbps ~ 8Mbps
• Video Frame Rate: 30fps@1080P
• Image snapshot: Supported
• Power Supply: DC 5V/1A
• Hard Reset: Supported
• Power Consumption: <5W
• Working Environment: -10ºC~+55ºC ,10%~90% RH
• Weight: 110 kg
• Network Protocol: HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, NTP, UPNP, RTSP, Onvif, DDNS
• Smart Phone: iOS(5.0 or above),Android(2.3 or above)
• WiFi: (802.11b/g/n), 2.4G only, supports, WEP/WPA-PSK/WPA2-PSK encryption
• P2P: Supported
• Dimensions(L*W*H) : φ70×110 mm