Dinsafer NExT WIFI Alarm System
|CPU||Freescale ARM Cortex-A7|
|Working Temperature||(-20- 60)℃|
|Wireless Range||433.92MHz RF Distance 300m without obstacle
WI-FI 2.4GHz IEEE 802.11b/g/n, range 50m
|Cellular||GSM 850/900/1800/1900MHz, for global GSM carriers|
|Battery||The Lithium Polymer battery, rechargeable, replaceable, with wired connector. 2200mAh|
|Stand-by Time||10 hours hours|
|Build-in Siren dB||100db@30cm, can be muted by App|
|Power IN||DC 5V2A|
|Installing||Desktop & Wall.|
|Operation Interface||App (iOS & Android)
Accessories like wireless keypad or remote controller, etc.
|Accessories Supported Type||Official wireless accessories.
No wired sensor allowed.
Smart accessories, like Smart Cameras & Smart Plugs
|Pre-paired before Shipping||Supported|
|Accessory Pairing||Supported, by scanning the QRCode.|
|Easy Networking Settings||Launch App, according to the guiding, by pressing down the quick config button in the battery cover and follow the instruction in app to do quick networking settings.|
|Supported Networking||LAN/WIFI, DHCP or Manual IP, only IPV4, no IPV6.|
|GSM Supported||Standard SIM card (Mini Sim Card, 2FF)|
|Show Arming Status||Supported.|
|Show System Status||In App, there is a real-time status bar indicated.|
|Device Password||Supported. Set and modified by App. Also used by keypad verification.|
|Adjustable Siren Time||Set by App, default in 1 min.|
|Promo Tone Indicating||The event listed below would send promo tone. (including, not all)
|Arming Operations||By App/remote control: ARM, DISARM, HOME ARM, SOS
By Keypad: ARM, DISARM, HOME ARM
By some accessories: Tamper Alarm
|Entry Delay||Support, default in 30 sec, users choose which accessories involved.|
|Exit Delay||Support, default is 30 sec safe time.|
GSM Notification Supported
Users would be allowed to stop alarm by tapping in push notification pop-up window.