Nice designed remote controller, with silicon key ring & low battery warning supported.
The DYK01O remote controller is an accessory of series smart alarm system. It helps you quickly arm/disarm/home arm/trigger SOS the system.
| Working Voltage | DC 3V |
| Battery | 1 × CR2032 button battery (3V) |
| Working Current | ≤20mA |
| Standby Current | ≤0.4μA |
| Transmission Distance | Without obstacle 120m |
| Transmission Frequency | 433.92MHz |
| Working Temperature | -10°C~50°C |
| Humidity | ≤90%rh (non-condensing) |
| Weight | 16.4g (battery included) |
| Dimension | 58.0mm*33.1mm*11.0mm L*W*H(±0.1mm) |
The DKPD01A wireless 2-way keypad is an accessory of smart alarm system. It enables convenient operations to arm/disarm/home arm. It can control the main panel actively and receive command from main panel. Password control and tamper alarm function make it safe and reliable.
| Power In | DC 5V1A |
| Battery | 890mAh 3.7V Rechargeable Li Battery |
| Battery Standby Time | 6 months for daily use (8 times a day, Every times 30 seconds) |
| RFID Support | 125Khz, Unlimited RFID Tags supported |
| Low Battery Warning | Supported, Push notification & SMS |
| Buttons | 13 Touch buttons |
| Transmission Distance | Without obstacle 200m |
| Transmission Frequency | 433.92MHz |
| Working Temperature | -10°C~50°C |
| Humidity | ≤90%rh (non-condensing) |
| Weight | 162.3g with built-in battery |
| Dimension | 145 * 92.1 * 16.7 mm L*W*H |
Say goodbye to the complicated codes which other systems asking their users to remember and operate on the keypad. Just tapping in our apps, you would be supprized about this gentle and easy way to control such a powerful system. Scanning QR codes for pairing, checking Smart Cameras, turning ON/OFF the Smart Plug etc., all in our apps.
The DSG01O wireless water intrusion sensor is an accessory of smart alarm system. It’s fashion design, energy saving, and low battery warning supported. The main panel will send a SMS to user for battery replacement when needed. It triggers alarm when detecting water intrusion.
| Working Voltage | DC 3V |
| Battery | 1 × CR2032 button battery(3V) |
| Working Current | ≤27mA |
| Standby Current | ≤2μA |
| Transmission Distance | Without obstacle 200m |
| Transmission Frequency | 433.92MHz |
| Working Temperature | -10°C~50°C |
| Humidity | ≤90%rh (non-condensing) |
| Weight | 25.8g(Battery not included) 37g(Battery included) |
| Dimension | Transmitter :80.0mm*38.2mm*13.3mm(L*W*H) Connecting Line: 21cm |
This product is a carbon monoxide detector. The gas detection adopts a carbon monoxide electrochemical sensor to ensure stable and constant performance. When concentration of the leaked carbon monoxide reaches the given alarm level, the detector LED flashes red and buzzer gives out alarm sounds. Besides suitable for early warning and protection of carbon monoxide leakages in houses, villas, factories, shopping malls, warehouses, office buildings or other indoor places. This unit has a subtle shockproof design, which makes it also suitable for vehicle use.
Great Features:
• Adopts MCU Processing
• Manual Test / Auto-Reset
• Hush Function
• Low Voltage Compensation
• Temperature Compensation
• Low Battery Warning
• Anti-RF Interference (20V/m-1GHz)
• Dustproof, Mothproof, Anti-light Interference
• SMT Manufacture Technology with High Reliability
• Shockproof Design Suitable for Vehicle Use
| Operating Voltage | DC 3V (2X AA Batteries) |
| Static Current | ≤ 10μA |
| Alarm Current | ≤ 35μA |
| Warm-Up Time | 1 minutes |
| Hush Time | 10 minutes |
| Transmission Distance | Without obstacle 200m |
| CO Alarm Level | 40ppm≤X<75ppm, alarm after 75 minutes 75ppm≤X<200ppm, alarm after 25 minutes 200ppm≤X, alarm after 30-50 secs < 40ppm, alarm reset |
| Alarm Indication | Red LED & Beeping & System Alarm |
| Failure Indication | Orange LED & System Alarm |
| Sound Level | ≥ 85 dB / 3m |
| Working Temperature | -10˚C ~ +50 ˚C |
| Working Humidity | ≤ 95RH |
| Installation Mode | Wall or Ceiling mounted |
| Execute Criterion | EN14604-2005, GB15322, 5-2003 |